Comparison2026-11-20Updated 2026-11-20

GPT-6.2 Sol Pricing vs DeepSeek V4.1 Flash

TL;DRDeepSeek V4.1 Flash charges less in every token category shown below. A workload with 20 million uncached input tokens and 5 million output tokens costs $6 on Flash off-peak, $12 on Flash peak, or $90 on GPT-6.2 Sol Standard at short-context rates.

By James Carter and Olivia Bennett

How much do GPT-6.2 Sol and DeepSeek V4.1 Flash cost?

OpenAI lists GPT-6.2 Sol as gpt-6.2-sol. DeepSeek serves V4.1 Flash-1017 under deepseek-flash. The table uses first-party, pay-as-you-go API rates in USD. OpenAI Standard here applies to requests of up to 272,000 input tokens.

USD per 1 million text tokens
Billing categorySol StandardFlash off-peakFlash peak
Uncached input$2.00$0.15$0.30
Cached input read$0.10$0.003$0.006
Output$10.00$0.60$1.20
30-minute cache write$2.50Billed at the cache-miss rate
12-hour cache write$5.00DeepSeek manages cache retention

DeepSeek’s peak hours are 01:00 to 04:00 and 06:00 to 10:00 UTC, Monday through Friday, excluding Chinese public holidays. That is 09:00 to 12:00 and 14:00 to 18:00 in Beijing. All other hours use off-peak rates.

For identical output volumes, Sol Standard costs about 16.7 times as much as Flash off-peak and 8.3 times as much as Flash peak. Output often accounts for much of the bill on coding tasks because it includes billed reasoning tokens alongside the visible response. Use the provider’s reported output total when estimating cost.

What would a month of API usage cost?

These are estimates with the same billed token counts on both APIs. Each Flash column assumes the whole workload falls in that pricing window. Split your bill by actual window if requests run across both. For the cached example, the prefix is already warm and any separate GPT cache writes are outside the subtotal. Tool fees, taxes, and retries are also outside these examples.

Illustrative monthly token costs
WorkloadTokens per taskSol StandardFlash off-peakFlash peak
10,000 support replies2K uncached in, 500 out$90.00$6.00$12.00
1,000 repository reviews20K uncached in, 80K cached in, 4K out$88.00$5.64$11.28
500 repository tasks200K uncached in, 16K out$280.00$19.80$39.60
Monthly spend by workload. All bars use the same $0 to $300 scale. Exact costs are in the table above.
Token cost formula Multiply each billing category’s token count by its price per million, add the results, then divide by 1,000,000.

For the repository reviews, Flash off-peak bills 20M uncached input at $0.15, 80M cache reads at $0.003, and 4M output at $0.60 per million. That comes to $3.00 + $0.24 + $2.40 = $5.64. On Sol, output alone contributes $40 of the $88 subtotal. Cutting billed output from 4,000 to 3,000 tokens per review would save $10 a month on Sol or $0.60 on off-peak Flash at this volume, assuming everything else stays the same.

When do GPT-6.2 Sol cache writes pay for themselves?

A 100,000-token prefix costs $0.20 at Sol’s regular short-context input rate, $0.25 to write with 30-minute retention, or $0.50 to write with 12-hour retention. A full cache read of that prefix costs $0.01. At these rates, one full replay pays back a 30-minute write. A 12-hour write takes two full replays, measured against billing each occurrence as ordinary uncached input.

One 100K-token prefix, plus repeat requests at Sol Standard
Reuse of that prefixOrdinary input30-minute cache12-hour cache
Initial request only$0.20$0.25$0.50
Initial + 1 repeat$0.40$0.26$0.51
Initial + 2 repeats$0.60$0.27$0.52
Initial + 9 repeats$2.00$0.34$0.59

Prefix costs only. The cache columns assume one full write, full hits on repeats within the chosen window, and zero rewrites. If both retention settings yield the same hits, 30 minutes is cheaper.

Keep shared instructions and repository context at the start of the prompt. Append the changing diff or question after that shared prefix. In the GPT-6.2 Responses API, put reusable instructions in an early developer message in input. Top-level instructions are appended and billed as uncached input.

Use the actual response counters to reconcile a bill. For OpenAI Responses, subtract cached_tokens and cache_write_tokens from total input tokens before charging the ordinary input rate. Price the writes by their recorded retention. DeepSeek’s Chat Completions response reports prompt_cache_hit_tokens and prompt_cache_miss_tokens, which you can price directly.

What changes above 272K input tokens?

On GPT-6.2 Sol Standard, a request above 272,000 input tokens costs $4.00 per million uncached input, $0.20 per million cached reads, and $15.00 per million output. OpenAI applies those rates to the entire request. It also doubles the cache-write rates. DeepSeek publishes the same Flash token rates across its supported context for each pricing window.

Cost per request with 10K billed output tokens and entirely uncached input
Input sizeSol StandardFlash off-peakFlash peak
270K input$0.64$0.0465$0.0930
300K input$1.35$0.0510$0.1020

Adding 30K input tokens in this example adds $0.71 on Sol. For a repository agent, a long test log or a replay of earlier tool results can push a turn over the threshold. Log per-request input size alongside the total bill. Monthly token totals alone cannot tell you how many requests crossed it.

Which model costs less per accepted task?

Start with the cost of all attempts, including retries and escalations, then divide by the number of tasks that pass your acceptance checks. For code review, an accepted result might be a valid finding a maintainer can reproduce. For an automated patch, it might be a change that passes tests and survives review. Set the same criteria for both models.

Take the 1,000 repository reviews above. Running all 1,000 on off-peak Flash costs $5.64 in model tokens. If 150 reviews each need one Sol pass at $0.088, add $13.20 for a total of $18.84. Running all 1,000 on Sol costs $88 under the same token and cache assumptions. The 15% escalation rate is an input to the estimate. Check the final acceptance rate and review time before choosing a workflow.

For an initial comparison, run both models on the same set of tasks with the same tools, timeout, and acceptance criteria. Record model spend, billed reasoning and output, retries, and reviewer minutes. Start with workloads you can verify automatically, such as schema-checked extraction or test-backed changes. A cheap first pass can save money there because you can decide quickly whether to keep it or escalate.

Frequently asked

How much are 1 million uncached input tokens and 1 million output tokens?

Across requests that qualify for Sol’s short-context Standard rates, the total is $12.00. Flash costs $0.75 off-peak or $1.50 peak for the same billed volumes.

Does GPT-6.2 Sol Batch close the price gap?

OpenAI Batch halves Standard token rates. At short context, that brings the rates to $1.00 for uncached input, $0.05 for cached reads, and $5.00 for output per million. The support-reply example drops from $90 to $45 on Sol Batch. Flash still costs $6 off-peak or $12 peak for that mix. Batch suits work that can wait for asynchronous processing.

Do web search calls affect the comparison?

Yes. OpenAI’s built-in Web Search is $10 per 1,000 calls, with billable search-result tokens priced at model rates. DeepSeek stopped charging a separate per-call fee for supported model-triggered search and fetch on November 18, 2026 at noon Beijing time. Retrieved content still adds model input tokens. DeepSeek’s standalone Search and Fetch APIs each cost $0.75 per 1,000 successful requests.

Can I use these prices for a Coding Plan or another gateway?

Use the prices here for direct API budgeting. A Coding Plan, ChatGPT subscription, or third-party gateway has its own billing terms. For a team comparing gateways, estimate from the rates and usage counters on the exact route it plans to use.